Learn how to sew on badges manually or by machine

When you want to liven up a piece of clothing, accessory, luggage piece or perhaps hats you could sew on badges to get the fresh look easily. Badges or patches when placed strategically can immediately change the look of a garment or accessory and take it from boring to spunky within just a few minutes. When you’ve got children and they keep earning badges of merit you would want to sew them on. However, as intimidating as it might sound, sewing on badges is quite easy when you know the right way to do it.

To do this procedure for sewing on a badge, begin with placing the badge to the place that you want it to be. Now secure the badge well with some pins in order that it stays in place and doesn’t shift when you’re sewing it on. Now if you’re putting the patch on a garment, you need to fix the patch and after that try the garment on to be sure that the patch or the badge looks most suitable in the place. If the patch requires a little readjustment you can do it at this time easily.

Now thread the needle ensuring that the thread you’re using isn’t too long. Keep the thread on a length of approximately 18inches for easy maneuvering. If your thread is simply too long then you might get bothered by knots. When you’ve the thread ready make a knot at the end of the thread. It is possible to thread a needle yourself by holding the non knotted end between your forefinger and thumb and then passing it in the eye of your needle. You could also take the help of a needle threader if you find threading a needle like this difficult.

Pass the needle in the badge and the fabric making sure that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from which you began stitching keeping this distance from your last stitch all of the time. Continue stitching around the entire perimeter of the badge till you have completed stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread using a single stitch. Pull the thread strongly to secure the knot after which cut-off any excess thread which is left. Lastly remove extra safety pins that you were using to secure the patch into position.

It’s also possible to sew on badges through the help of a sewing machine in case you don’t wish to accomplish the same yourself. Choose a thread that matched the colour of the patch and then tread your machine. You could also pick out a contrasting color depending on the look that you would like to present your badge. Once this is accomplished you should start sewing you badge. Utilize the top of the badge as your starting place and sew all along the edge of your badge using the regular stitch mode ending at your start line. Once done, cut the extra thread that connects the badge to the machine and your garment is ready to be used with the badge.